The Plate Carrier is a modern model of a plate carrier from a domestic manufacturer for plates 250x300 mm. The quick release system allows you to remove the plate carrier in seconds, and the side pockets for soft ballistic elements allow you to increase the protection area. The original and durable material guarantees a long service life. This is a strong, durable material resistant to UV and deformation. Thanks to its high performance characteristics, Cordura is actively used in the production of military and tactical equipment.
The Plate Carrier "Plate Carrier" consists of three modules (front, back, and side) with internal pockets for hard armor plates and shock-absorbing elements. Access to the front and back modules is from below, and to the sides - from above. Opening the Velcro flap, insert the plate or soft elements and close the flap.

• The size of the plate carrier is selected by the rib circumference (should correspond to the range indicated in the plate carrier size).
• The size of the compartment for the main plate is 250x300 mm.
• The size of the compartment for side plates is 150x200 mm.
• Additionally, you can purchase specially designed ballistic packages for side cummerbunds (2nd class DSTU, 2 pieces) for the plate carrier. The size of the packages is selected to match the size of the plate carrier.
• The plate carrier is suitable for main plates with a thickness of 5 to 25 mm, including those with a curve.
• Armor plates are not included.
• The plate carrier is made of strong Cordura 500D Weber Germany fabric, which is water and oil repellent.
• The product is sewn with strong nylon threads.
• High-quality quick-release hardware 2M DUE EMME ROC 40 and 80 is used.

Throughout the chest, back, and side compartments of the plate carrier, there are 3D mesh inserts on the inner side. They provide cushioning and airflow. Ergonomic shoulder straps follow the body contours, have volume adjustment and a lining with 3D mesh.

The vest has adjustment for circumference and height. The flap opens on the shoulders for height adjustment, and the length is adjusted to the required size. There is a hidden adjustment system on the back (in the form of elastic inserts with Velcro), with which the vest can be adjusted for volume. The side inserts have internal compartments for soft protective elements. On both sides of the front module, there are ROC Buckle fasteners (made by 2M, Italy), which significantly speed up putting on or taking off the plate carrier. The same quick-release fasteners are installed on the shoulder straps at the front of the vest.

On the front and back panels of the plate carrier, there is a Velcro panel with slots on top, where patches or ID identifiers can be placed, as well as MOLLE-compatible gear attached. The entire outer surface of the vest is adapted for attaching additional pouches or gear on the MOLLE interface. There is an evacuation handle on the back, which, in the hiking position, is fixed to the panel with Velcro panels.

It is worth noting the quick release system of this plate carrier separately. The vest can be released equally well with both the left and right hand. It only takes two movements - pull down on the ROC / 80 fastex cord to unfasten the side panel.

Shipping and payment

Information about sending orders:

• orders are sent within Ukraine by the logistics company Nova Poshta
• delivery time from the moment of ordering is on average 2-3 days
• shipping days for orders are from Monday to Saturday
• fragile items (glasses, mugs, etc.) are securely packaged in bubble wrap with a "Caution Fragile" mark on the box
• detailed information on the website in the "Delivery" web page

Available payment methods for your order:

• cashless payments
• payment upon receipt (cash on delivery)
• detailed information on the website in the "Payment" web page