"Plate Carrier Coyote " plate carrier is a modern model of a plate carrier (body armor cover) from a domestic manufacturer for 250х300 mm plates. The quick release system will allow you to remove the plate carrier in a matter of seconds, and the side pockets for soft ballistic elements will allow you to increase the area of ​​protection. The original and wear-resistant material guarantees a long service life. It is a strong, wear-resistant material, resistant to ultraviolet rays and deformation. Due to its high operational characteristics, Cordura is actively used for the production of army and tactical equipment.
Structurally, the plate carrier "Plate Carrier MultiCam" consists of three modules (chest, back and side) with internal pockets for solid armor plates and shock-absorbing elements. Access to the front module and rear module is from below, and to the side modules - from above. After opening the valve on the Velcro type, insert the plate or soft elements and close the valve.

• In addition, you can buy specially designed ballistic bags for side chamber bands (2st class DSTU, 2 pieces) in the plate carrier.

There are 3D mesh inserts on the entire plane of the chest, back and side sections from the inside of the plate holder. They provide cushioning and air flow. Ergonomic shoulder straps follow the contours of the body, are adjustable in volume and lined with 3D mesh.

The vest has girth and height adjustment. The valve opens on the shoulder for height adjustment, and the length is adjusted to the required size. There is a hidden adjustment system on the back (in the form of elastic inserts with velcro), which can be used to adjust the volume of the vest. Side inserts have internal compartments for soft protective elements. On both sides of the front module there are ROC Buckle fasteners (manufactured by 2M, Italy), which can be used to significantly speed up the putting on or taking off of the plate carrier. The same quick-opening fasteners are installed on the shoulder straps on the front of the vest.

The front and rear panels of the plate carrier have a Velcro top panel with slots to place patches or IDs, as well as to attach MOLLE-compatible gear. The entire outer surface of the vest is adapted for attaching additional pouches or equipment to the MOLLE interface. There is an evacuation handle on the back, which in the retracted position is fixed to the back with Velcro panels.

Separately, I would like to emphasize the quick reset system of this plate carrier. The vest can be thrown off equally well with both left and right hands. Only two movements are necessary - pull the ROC /80 fastex cord down to unfasten the side panel.

Shipping and payment

Information about sending orders:

• orders are sent within Ukraine by the logistics company Nova Poshta
• delivery time from the moment of ordering is on average 2-3 days
• shipping days for orders are from Monday to Saturday
• fragile items (glasses, mugs, etc.) are securely packaged in bubble wrap with a "Caution Fragile" mark on the box
• detailed information on the website in the "Delivery" web page

Available payment methods for your order:

• cashless payments
• payment upon receipt (cash on delivery)
• detailed information on the website in the "Payment" web page