• dimensions — 190 x 61 x 1 cm
• weight — approximately 488 g
• designed after a U.S. military sleeping mat
• thermal insulation from cold surfaces
• helps protect against contact with damp ground
• soft and resilient polyethylene foam
• non-slip surface helps keep the sleeping bag in place
• easily rolls up for transport
• 2 straps for securing the mat when rolled
• can be attached to a backpack
• does not require inflation
• suitable for hiking, camping and field use
• material — 100% Polyethylene Foam

Mil-Tec® US Isomatte is a classic foam sleeping mat designed after sleeping mats used by the U.S. Armed Forces. Its simple roll-up construction, low weight and inflation-free design make it a practical choice for hiking, camping, field trips and other outdoor activities.

The sleeping mat is made from 100% polyethylene foam, which creates an insulating layer between the user and the ground. The material helps reduce direct contact with cold and damp surfaces, while its 1 cm thickness provides basic cushioning on uneven terrain.

The mat features a non-slip surface that helps reduce sleeping bag movement. Two straps are included to secure the mat when rolled and prepare it for transport.

Polyethylene Foam — Simple and Reliable Construction

The Mil-Tec® US Isomatte is made from soft polyethylene foam. Unlike inflatable sleeping mats, this construction does not use an air chamber, valves or other components required for inflation.

Simply unroll the mat before use and roll it back up afterwards. This design is particularly practical in field conditions where simple gear and minimal setup are preferred.

Insulation from Cold Surfaces

The polyethylene foam creates an insulating layer between the user's body and the ground. This helps reduce direct heat transfer to a cold surface while resting or sleeping.

The mat can be placed underneath a sleeping bag inside a tent, shelter or directly on a suitably prepared area of ground.

Barrier Between the User and Damp Ground

The material also creates a physical barrier between the user's gear and damp ground, grass or other surfaces.

This makes the mat practical not only for overnight use but also for short rest stops, sitting on the ground or setting up a temporary resting area in the field.

1 cm Thickness

The sleeping mat is 1 cm thick. The polyethylene foam provides basic cushioning and helps smooth out minor surface irregularities.

It is important to note that this is a classic lightweight field sleeping mat rather than a thick self-inflating or inflatable camping mattress. Its main advantages are simplicity, low weight and reliable construction.

Non-Slip Surface

The surface of the mat has non-slip properties that help reduce sleeping bag movement during the night.

This can be particularly useful when a tent is pitched on slightly sloping ground or when the user moves frequently while sleeping.

Full-Size 190 x 61 cm Format

When unfolded, the Mil-Tec® US Isomatte measures 190 x 61 cm. This provides a full-length insulating surface for the user and sleeping bag.

The 61 cm width provides sufficient space for standard outdoor use while keeping the overall transport dimensions manageable.

Approximately 488 g Weight

Despite its full-size dimensions, the sleeping mat weighs approximately 488 g. This makes it suitable for hiking and field gear without adding excessive weight to the overall load.

This format is particularly practical for users who prefer a simple foam sleeping mat without a pump, valves or the need to maintain air pressure.

Two Transport Straps

The mat comes with two straps that secure it when rolled.

The straps help prevent the mat from unrolling during storage and transportation.

Can Be Attached to a Backpack

The rolled sleeping mat can be transported together with hiking or field gear. Once secured with the included straps, it can be carried using a suitable external attachment point on a backpack.

This allows the mat to be carried externally without taking up valuable space inside the backpack's main compartment.

No Risk of Deflation from a Small Puncture

Because the Mil-Tec® US Isomatte is made from solid polyethylene foam and does not contain an air chamber, a small accidental puncture will not cause the entire mat to lose air and become unusable in the way an inflatable mat can.

This makes the classic foam construction particularly practical in field conditions where equipment may come into contact with branches, stones and other uneven or rough surfaces.

For Hiking, Camping and Field Use

The Mil-Tec® US Isomatte is suitable for:

• hiking;
• camping;
• field use;
• sleeping in a tent;
• use underneath a sleeping bag;
• short rest stops;
• outdoor activities;
• backup gear kits.

Its classic construction makes the model particularly practical when simplicity, quick setup and independence from additional equipment are important.

Technical Specifications

• manufacturer: Mil-Tec®;
• model: US Isomatte;
• type: foam sleeping mat;
• construction: roll-up, non-inflatable;
• material: 100% Polyethylene Foam;
• length: 190 cm;
• width: 61 cm;
• thickness: 1 cm;
• dimensions: 190 x 61 x 1 cm;
• weight: approximately 488 g;
• non-slip surface: yes;
• securing straps: 2, included;
• inflation required: no.

Advantages of the Mil-Tec® US Isomatte

• classic and proven foam sleeping mat construction;
• designed after a U.S. military sleeping mat;
• 100% polyethylene foam;
• provides insulation from cold surfaces;
• creates a barrier against damp ground;
• provides basic cushioning;
• non-slip surface;
• full-size 190 x 61 cm format;
• 1 cm thickness;
• weighs approximately 488 g;
• does not require inflation;
• no air chamber or valve;
• quick to deploy;
• easy to roll up;
• 2 securing straps included;
• convenient for external backpack carry;
• suitable for hiking and camping;
• practical for field use.

FAQ

What is the Mil-Tec® US Isomatte made from?
The sleeping mat is made from 100% polyethylene foam. This lightweight foam material creates an insulating layer between the user and the ground.

What are the dimensions of the sleeping mat?
When unfolded, the mat measures 190 x 61 x 1 cm.

How thick is the Mil-Tec® US Isomatte?
The mat is 1 cm thick.

How much does the sleeping mat weigh?
The stated weight is approximately 488 g.

Does the Mil-Tec® US Isomatte need to be inflated?
No. It is a classic polyethylene foam sleeping mat without an air chamber, so it only needs to be unrolled before use.

Does the mat provide insulation from cold ground?
Yes. The polyethylene foam creates an insulating layer between the user and the surface, helping reduce heat loss through direct contact with cold ground.

Does the mat protect against damp ground?
The material creates a physical barrier between the user or sleeping bag and a damp surface, helping separate the gear from wet grass and ground.

Will a sleeping bag slide on the mat?
The mat has a non-slip surface designed to help reduce sleeping bag movement during use.

What are the two straps used for?
The straps secure the mat when rolled, making it easier to store and transport.

Can the sleeping mat be attached to a backpack?
Yes. Once rolled and secured with the straps, the mat can be carried using a suitable external attachment point on a hiking or field backpack.

What happens if the mat gets a small puncture?
The mat does not contain a sealed air chamber, so a small puncture will not cause it to deflate. This is one of the practical advantages of a traditional foam construction.

What is the Mil-Tec® US Isomatte suitable for?
The model is suitable for hiking, camping, field use, sleeping in a tent, use underneath a sleeping bag and other outdoor activities.

Shipping and payment

Information about sending orders:

• orders are sent within Ukraine by the logistics company Nova Poshta
• delivery time from the moment of ordering is on average 2-3 days (and up to 5 days if the product is in a remote warehouse)
• shipping days for orders are from Monday to Saturday
• fragile items (glasses, mugs, etc.) are securely packaged in bubble wrap with a "Caution Fragile" mark on the box
• detailed information on the website in the "Delivery" web page

Available payment methods for your order:

• cashless payments
• payment upon receipt (cash on delivery)
• detailed information on the website in the "Payment" web page